Steel

The rebar detector is mainly used for testing the position of the steel bar, the thickness of the protective layer, the distance between the steel bars and the diameter of the steel bar in the concret

The sensor runs parallel to the steel bar and sweeps directly above the steel bar at a constant speed. The instrument emits a beep to prompt the sensor to cross a steel bar. At this time, the protecti

1.Take out the rebar detector and connect the probe. 2. Turn on the power of the rebar detector, select the thickness test function, and set the steel bar diameter to the known diameter value and the

On the morning of July 17, a batch of new U-shaped steel support equipment was loaded in the intelligent equipment manufacturing workshop of China Coal Group, and then sent to a mine in Heilongjiang a

Rebar Detector automatic measurement The sensor runs parallel to the direction of the reinforcing bar, sweeping across the reinforcing bar at a constant speed, and the instrument emits a beep, prompt

Why should the steel bar be tested for corrosion? Due to the corrosion of the reinforcing bar, the section of the reinforcing bar is weakened, and the bearing capacity of the section is reduced.