The operation procedure of the rebar detector in concrete is as follows:
1. Place the battery in the steel detector display in the concrete
2. Connect the rebar detector in concrete scanner
3. Open the rebar detector in concrete display
4. Basic settings
5. Selection of rebar detector in concrete scanning function
6. Scanning operation
7. Scanning image of rebar detector in concrete
8. Turn off the power and remove the battery; disconnect the scanner from the display and box the rebar detector in concrete.
The operation of the rebar detector in concrete is very simple. As long as you follow the above steps to operate the rebar detector in concrete, you will be able to obtain accurate detection data. For other questions about rebar detector in concrete, please feel free to contact us! ! !